Power 6000d For Water Well Drilling
| Place of Origin:South Korea Chungcheongbuk-do | Brand Name:HANJIN D&B |
| Model Number:POWER 6000D |
Online Postings: Products , Selling Leads
Country/Territory: South Korea
Business Type: Manufacturer, Trading Company
Number of Employees: 11 - 50 People
POWER 6000D for waterwell drilling
Character
1. Drill up to 600M with 4" and up to 12" for water well & micro pile
2. Dual Rotary System (Max.12") can be mounted on this drill as option
3. Vertical, Angel/Rotary Drilling, Down the Hole available.
4. Mast is strong so mast is more stable at rotary drilling (tri-cone drilling).
5. All instrument & control levers are concentrated. So, as driller can operate this drill rig
6. Reduce the cost of drilling accessories and wear & tear expense over 30-50% such
as bit, wearing parts & Diesel and so on.
7. Be low in working & maintenance expensive.
Specification
Dimension | OA Lenth - transport | 8.3M | |
OA Width | 2.2M | ||
OA Height - transport | 2.5M | ||
OA Height - mast up | 8.5M | ||
Weight - less drill pipe | 7.5Ton | ||
Engine -Euro iii -Turbo ntercooler | Model | Doosan DL06 | |
Rated Power | 164HP/2000rpm | ||
Fuel Capacity | 200L | ||
Cooling system | Water Cooling | ||
Top Head Rotation | R.P.M | 1 st | 0 ~ 120 |
2 nd | 0 ~ 60 | ||
Torque | 1 st | 300kg-m | |
2 nd | 600kg-m | ||
Single reduction oil both gearbox with two heavy single speed, disc valve motor. The gearbox is mounted outside the mast rails to ease drill pipe and casing handing. | |||
Feed System | Traverse Cylinder | 120mm*90mm*2750mm | |
Head travel | 1 st | 5.5M | |
Dump mast | 2 nd | Up:1.5M, Down:0.5M | |
Pull up capacity | 16Ton | ||
Pull down capacity | 8Ton | ||
Top head driven by hydraulic cylinders throught heavy duty chain. | |||
Gear Box Sliding | Travel | 350mm | |
Option-Upper Frame Moving : It can be moved back and forth. Casing treatment and centering calibration are easy | |||
Winch | Spool capacity | 30M of 12mm cable | |
Line pull | 5Ton | ||
Hydraulic System (Load sensing) | General 3 pump open loop system | Tank Capacity | 260L |
Filtration | 10micron | ||
Pump Model | K3V112 x 2+35 (HP constant) | ||
Cooling system | Air cooling | ||
Operating pressure | 280bar | ||
Light & Electrical System | Mast | 2-60watt floodlights | |
Control Panel | 2-gauge floodlights | ||
Work | 2-60watt floodlights | ||
Control Panel | All controls gauges are grouped at the operators station within sight of the borehole | ||
Hydraulic Outrigger Jacks | Four hydraulic outrigger jacks are fitted to the outer corners of the rig for easy and accurate levelling of the rig. | ||
Self-Loading | Ground Clearance | 1400mm | |
Width | 3100mm | ||
Drill pipe | Max. Length | 4.5M(10.5ft) / 6.0M(20ft) | |
Hydraulic Clamp | Single clamp | 280mm | |
Working Table | Max. casing diameter | 280mm | |
Drill Pipe Breakout | Torque Break-out | 4Ton | |
Crawler Base (Steel type) Option: Rubber type | Crawler type | Sola 055 | |
Crawler speed | 2.5km/H | ||
Ground pressure | 0.5kg/cm2 | ||
3-web track shose | 400mm | ||
Ground clearance | 400mm | ||
Drilling Capacity | Tricon drilling | T -> 4 ~12 Max.600M | |
DTH drilling | D -> 4 ~8 Max.600M | ||
Jib(Lazy suzanne) | 80degree Turn. 350mm Extension | ||
Option | Mud pump (Hyd. cylinder duplex acting piston pump) | 200L /min, 800L /min | |
1000L /min, 1500L /min | |||
Compressor | 14bar 400CFM | ||
21bar 500CFM | |||
21bar 750CFM | |||
25bar 900CFM | |||
Water Injection Pump | 60L /min, 35bar | ||
Welder | Hyd. Motor Drive 250Amp, DC | ||
Inverter | 4.5Kw | ||
Rod Handling Device | |||
Foam Pump | 60L /min, 35bar | ||
Dural Rotary System | 12 | ||
Lubrication | Oil Lubrication System | ||
Power 6000d For Water Well Drilling
Other Products from this Supplier
Contact Us
TOPIA IND. CO LTD
[South Korea]
Street Address : Rm 701 Doosung Bldg. 763-4, Sanggye-Dong, Nowon-Ku
City : Seoul
Country/Region : South Korea
